Control4 Dimmers allow you to replace any "dumb" dimmers with sleek, sophisticated dimmers that will not only provide elegant control of the lighting inside or outside of your home, but can also be programmed to respond automatically to desired light levels.

Control4 Dimmers allow you to replace any "dumb" dimmers with sleek, sophisticated dimmers that will not only provide elegant control of the lighting inside or outside of your home, but can also be programmed to respond automatically to desired light leve

Control4® 120V Snow White Forward Phase Dimmer

An economical solution for dimming forward phase compatible loads, including incandescent, line-voltage halogens, and magnetic transformers, the Forward Phase Dimmer is also great for dimming high-wattage loads such as chandeliers and large banks of recessed lights. It is compatible with forward phase dimmable LEDs, CFLs, and fluorescents. Available in 9 stylish colors and finishes. 120V.

Compatible with incandescent, line-voltage halogen, and magnetic (iron core) transformers

Also compatible with forward phase dimmable LEDs, CFLs, and fluorescents

Protection circuitry prevents device damage in case of short circuit or excessive load

Continuously measures energy being used by the attached load

Elegant, sophisticated design makes a beautiful addition to any home or business

Custom engraving available to clearly identify which light each dimmer control

Backlit button engraving with programmable color control for easy readability regardless of time of day or light level

Programmable RGB LEDs provide status feedback for lighting and other devices in the system

Ambient light sensor automatically adjusts backlight and status LED brightness depending on the light level in the room

Available in a wide array of gloss and satin colors

Control4® screw-less faceplates, sold separately

The maximum load requirements for fluorescent, CFL and LED loads can vary greatly depending upon the specific fixture and/or bulb being used.

The quality and performance of these load types varies greatly from manufacturer to manufacturer.

The use of fluorescent, CFL, or LEDs load without a neutral wire connected to the dimmer is not recommended.

*Faceplates are not included. Don’t forget to order faceplates separately.

<div>  Enjoy simplified, quiet fan speed control of standard paddle-type ceiling fans with four fan speed buttons and one off button, in a beautiful interface that adds to the aesthetics of your home.</div> <ul>  <li>   Incorporate your fans into climate control scheduling, energy management and other automated events.</li>  <li>   Includes four fan speed buttons and one off button.</li>  <li>   Continuously measures energy being used by the fan.</li>  <li>   Available in up to 9 stylish colors and finishes.</li> </ul>

Enjoy simplified, quiet fan speed control of standard paddle-type ceiling fans with four fan speed buttons and one off button, in a beautiful interface that adds to the aesthetics of your home.

Control4® Wireless Fan Speed Controller

Control4® Black Wireless Fan Speed Controller

Incorporate your fans into climate control scheduling, energy management and other automated events.

Includes four fan speed buttons and one off button.

Continuously measures energy being used by the fan.

Available in up to 9 stylish colors and finishes.

Control4® Snow White Wireless Fan Speed Controller

The Control4® CA-1 Hub and Automation Controller is the perfect entry point into Control4 automation built around security, comfort, and convenience solutions. It has built-in control for IP, ZigBee®, and serial devices, plus an internal slot for a Z-Wave Plus™ module (sold separately). It is designed for homeowners, builders, MDUs, and hotels that want smart experiences that include smart lighting, thermostats, door locks, cameras, sensors, shades, and more. Control4 Connect is required starting April 23, 2024.  

The Control4® CA-1 Hub and Automation Controller is the perfect entry point into Control4 automation built around security, comfort, and convenience solutions. It has built-in control for IP, ZigBee®, and serial devices, plus an internal slot for a Z-Wave

Control4® CA-1 Hub and Automation Controller

The Control4® CA-1 Hub and Automation Controller is the perfect entry point into Control4 automation built around security, comfort, and convenience solutions. It has built-in control for IP, ZigBee®, and serial devices, plus an internal slot for a Z-Wave Plus™ module (sold separately). It is designed for homeowners, builders, MDUs, and hotels that want smart experiences that include smart lighting, thermostats, door locks, cameras, sensors, shades, and more.  The CA-1 is the foundation that makes smart products work together to deliver rich, orchestrated automation —the smart home experience homeowners truly want.  OvrC Pro remote management is built-in, giving you access to the entire network of IP devices, including third-party products. OvrC delivers enhanced troubleshooting capabilities and diagnostic data that makes remote support easy, eliminating unnecessary truck rolls and enabling you to streamline your business and tackle more jobs – all from the OvrC web or mobile app.

The simplest way to experience the Control4 Smart Home

Orchestrated automation for door locks, shades, cameras, sensors, and lighting

Built on Control4’s proven OS and ecosystem

Built-in connectivity for IP, ZigBee, and serial devices

Expansion slot for optional Z-Wave module

Can be powered by PoE—making it an ideal tool to expand ZigBee in larger Control4 installations

OvrC Pro built-in for advanced remote management and monitoring

Customers can see and hear who’s at the door through the Control4 mobile app or touchscreen, and a 5MP camera with a 180-degree field of view ensures every inch of the property is covered in crystal-clear HD.

Control4® Chime Satin Nickel Point of Entry Video Doorbell

Chime is the first video doorbell designed for the Control4 smart home. Chime allows homeowners to see and talk to visitors while controlling the most important smart home features. Customers can see and hear who’s at the door through the Control4 mobile app or touchscreen, and a 5MP camera with a 180-degree field of view ensures every inch of the property is covered in crystal-clear HD. Using Composer Pro, you can configure five adjustable motion zones, keeping your customer’s most critical areas protected.

Chime also features sensitivity controls to avoid unwanted notifications caused by faraway traffic or passersby. You can trigger a snapshot notification when someone arrives on the porch, or simply set Chime to begin recording without a notification when there’s movement in the yard. For additional peace of mind, Chime stores seven days of recordings in the cloud for playback. Chime offers PoE models for new construction or Wi-Fi for retrofit applications and is available in an elegant black or satin-nickel finish to blend in seamlessly with any Control4 smart home.

Video doorbell that fully integrates with Control4 Smart Home

5MP HD camera with 180-degree field of view

Two-way audio, no push and release required

Five customizable motion zones with sensitivity control

Stores seven days of event recordings in the cloud

Available in black and satin-nickel finishes

No other video doorbell delivers a complete smart home experience like Chime. While communicating with someone at the front door, homeowners can simultaneously disarm the alarm, unlock the door, open the garage door, or any other smart home features you can imagine. Homeowners can also communicate with others inside the house both at home or on the go with the help of their touch screen or mobile app.

With your help, buttons on the Control4 app or touchscreen can initiate a series of smart home events. If someone the homeowner knows arrives at the door, a single push of a button will disable the alarm, let them inside, and turn on the lights. You can also set the camera to start recording automatically when it senses movement on the porch or in the driveway.

A 5MP HD camera promises sharp video quality, and night mode and IR LEDs offer clear visibility, even in low light. Chime even features a 180-degree field of view for monitoring that goes well beyond the front door. Plus, two-way audio allows for natural conversations—no push and release required.

Adjustable Motion Zones and Sensitivity Controls

Personalize up to five motion zones with customized sensitivity control to ensure homeowners are notified when it matters most. Program Chime to send a notification with a camera snapshot whenever someone steps onto the front porch, or start recording without a notification when there’s movement in the yard. Or, set a scene that turns on the garage light and starts recording when there’s movement in the driveway after midnight. With Chime, the options for customization are endless.

Available in black and satin nickel finishes, Chime features a stylish design that blends seamlessly into any upscale smart home. Plus, Chime is IP65 rated and water resistant to keep it looking new for years to come.

Chime is available in Wi-Fi and PoE models, so it can be installed in retrofit jobs or new construction. Configuration is easy with the help of Composer Pro, which lets you program motion zones, custom alerts, snapshots, brightness levels, LEDs, and more.

Chime automatically stores seven days of recordings, and OS 3 lets you go back and watch video clips from the Control4 mobile app or touchscreen. In addition to seeing what happened at the front door, you can also access a History view of what happened in the home throughout the day. For increased video storage, pair Chime with a Luma NVR.

Service Chime from anywhere in the world with OvrC remote management. Receive notifications if there’s an issue with your customer’s system and get them back up and running fast from an easy-to-use mobile or web app.

Designed to fit discreetly behind any television, CORE 1 enables entertainment and intelligent automation experiences in every area, whether residential, commercial, or retail. CORE 1 delivers a beautiful, intuitive, and responsive 4K on-screen user interface with the ability to create and enhance the entertainment experience for any TV in the building. CORE 1 can orchestrate a wide range of entertainment devices including Blu-ray players, satellite or cable boxes, game consoles, and virtually any product with infrared (IR) or serial (RS-232) control. It also features IP control for TVs, Apple TV, Roku, AVRs, and other network-connected devices, as well as secure, wireless Zigbee control for remotes, lights, thermostats, smart locks, and more. Control4 Connect is required starting April 23, 2024.

Designed to fit discreetly behind any television, CORE 1 enables entertainment and intelligent automation experiences in every area, whether residential, commercial, or retail. CORE 1 delivers a beautiful, intuitive, and responsive 4K on-screen user inter

Control4® CORE 1 Controller

Designed to fit discreetly behind any television, CORE 1 enables entertainment and intelligent automation experiences in every area, whether residential, commercial, or retail. CORE 1 delivers a beautiful, intuitive, and responsive 4K on-screen user interface with the ability to create and enhance the entertainment experience for any TV in the building. CORE 1 can orchestrate a wide range of entertainment devices including Blu-ray players, satellite or cable boxes, game consoles, and virtually any product with infrared (IR) or serial (RS-232) control. It also features IP control for TVs, Apple TV, Roku, AVRs, and other network-connected devices, as well as secure, wireless Zigbee control for remotes, lights, thermostats, smart locks, and more.  For entertainment, CORE 1 provides higher quality audio and a second independent zone – one digital audio output, and an HDMI output. The pair of simultaneous audio streams are provided by Ryff, the built-in high-resolution audio server, allowing customers to listen to their local music library, or stream from a variety of leading music services, and AirPlay-enabled devices.  With OvrC Pro built in, CORE will be the foundation for networking monitoring and management, giving you access to the entire network of IP devices - including third-party products - for remote connections, device and network configurations, and troubleshooting. Those features, paired with diagnostic data, make remote support easy, eliminating unnecessary service calls, which enables you to streamline your business and tackle more jobs, all from the OvrC web or mobile app.

New, updated multi-core processors allow CORE to run OS 3 faster and more efficiently, with power to spare for future features and capabilities

Includes four IR and two serial outputs for device control, plus a digital audio output for streaming music, and an HDMI output to provide an interactive 4K on-screen display and second audio zone

Ryff high-resolution audio server built-in, with native support for popular streaming services including Qobuz, TIDAL, Pandora, Spotify, SiriusXM, SOUNDMACHINE, TuneIn, and more

Elegant 4K on-screen interactive menu for easy access to entertainment sources, device control, scene selection, comfort settings, surveillance monitoring, and more

Fan-less design features a heat-sink chassis and integrated power supply, for a simple, silent, and reliable installation

PoE+ provides power and network connectivity over a single CAT5/CAT6 cable

Elegant, low-profile design for flexible, simple installation inside a standard wall box, or mounted to the back of a TV, on the wall with an optional mounting bracket

Communication server built-in for audio/video intercom between Control4 touchscreens, Chime Video Door Bells and door stations

OvrC Pro built in for advanced remote management and monitoring, device and network configurations, and simplified troubleshooting solutions including the OvrC Connect app for customers

CORE 3, is the perfect fusion of multi-room, high resolution audio and intelligent automation processing for mid-size projects, whether residential, commercial or retail.  Powered by a next-generation multi-core processor, CORE 3 delivers a new level of speed and performance for instantaneous, interactive control to all the systems on the job, and a beautiful, interactive 4K on-screen menu. Control4 Connect is required starting April 23, 2024.

CORE 3, is the perfect fusion of multi-room, high resolution audio and intelligent automation processing for mid-size projects, whether residential, commercial or retail.  Powered by a next-generation multi-core processor, CORE 3 delivers a new level of s

Control4® CORE 3 Controller

CORE 3, is the perfect fusion of multi-room, high resolution audio and intelligent automation processing for mid-size projects, whether residential, commercial or retail.  Powered by a next-generation multi-core processor, CORE 3 delivers a new level of speed and performance for instantaneous, interactive control to all the systems on the job, and a beautiful, interactive 4K on-screen menu.  For entertainment, CORE 3 includes new, higher quality DACs (digital to analog converters) to power two analog audio outputs, one digital audio output, and an HDMI output. Simultaneous, independent audio streams are provided for each output by Ryff, the built-in high-resolution audio server, allowing customers to listen to their local music library, or stream from a variety of leading music services, and AirPlay-enabled devices.  CORE 3 includes a variety of I/O to automate audio and video, lighting, climate control, door locks, and other devices controlled by IP, infrared (IR), serial, ZigBee and Zwave. The versatility of the CORE 3 makes it an easy-add at the head end with the included rack mount ears, or a powerful remote-location addition with the option of AC or PoE+ for power, and an Ethernet output to provide network connection to another device.  With OvrC Pro built in, CORE will be the foundation for networking monitoring and management, giving you access to the entire network of IP devices - including third-party products - for remote connections, device and network configurations, and troubleshooting. Those features, paired with diagnostic data, make remote support easy, eliminating unnecessary service calls, which enables you to streamline your business and tackle more jobs – all from the OvrC web or mobile app.

New, updated multi-core processors allow CORE 3 to run OS 3 faster and more efficiently, with power to spare for new features and functionality currently in development

Four audio outputs—two stereo analog outputs, one digital audio output, and one HDMI—distribute up to four simultaneous, high-resolution audio streams from native streaming services, AirPlay-enabled devices, and local music libraries

1U, fan-less design features a heat-sink chassis and integrated power supply, for a simple, silent and reliable installation

Built-in two-port Ethernet switch simplifies installation by connecting an additional device to the local network

Integrated Zigbee and Zwave radios with external antennas simplify installation while delivering reliable low-bandwidth communication for other smart/connected devices

CORE 5 delivers the ultimate experience for intelligent automation deployments, whether residential or commercial, featuring the highest-quality audio of the Control4 CORE series, and the processing power to coordinate hundreds of smart/connected devices. CORE 5 can automate sophisticated audio and video distribution systems, complex interior and exterior lighting and color scenes, vital security and communications systems, and climate controls for multiple zones.Powered by a next-generation multi-core processor, CORE 5 delivers a new level of speed and performance for instantaneous, interactive control to all the systems on the job, and a beautiful, interactive 4K on-screen menu. Control4 Connect is required starting April 23, 2024.

CORE 5 delivers the ultimate experience for intelligent automation deployments, whether residential or commercial, featuring the highest-quality audio of the Control4 CORE series, and the processing power to coordinate hundreds of smart/connected devices.

Control4® CORE 5 Controller

CORE 5 delivers the ultimate experience for intelligent automation deployments, whether residential or commercial, featuring the highest-quality audio of the Control4 CORE series, and the processing power to coordinate hundreds of smart/connected devices. CORE 5 can automate sophisticated audio and video distribution systems, complex interior and exterior lighting and color scenes, vital security and communications systems, and climate controls for multiple zones.  Powered by a next-generation multi-core processor, CORE 5 delivers a new level of speed and performance for instantaneous, interactive control to all the systems on the job, and a beautiful, interactive 4K on-screen menu.  For entertainment, CORE 5 includes new, higher quality DACs (digital to analog converters) with audiophile-grade signal-to-noise ratio of 118dB, and powerful new DSPs that provide ultra-fine controls for a fully customizable 6-band equalizer with graphical display. Each of the audio outputs - three digital audio outputs, three analog audio outputs, and an HDMI output - can be independently streamed simultaneously by Ryff, the built-in high-resolution audio server, allowing customers to listen to their local music library, or stream from a variety of leading music services, and AirPlay-enabled devices.  CORE 5 includes secure, wireless Zigbee and Zwave, and plentiful I/O including IP, infrared (IR), and serial to control and automate distributed audio and video systems, lighting systems with color and temperature controls, climate control, security and surveillance systems and their sensors, audio/video intercom systems, and more. The sleek fan-less design, heat-sink chassis, rack-mount form factor, and top-of-the-line components make the CORE 5 the ultimate foundation to power any next-gen intelligent deployment.  With OvrC Pro built in, CORE will be the foundation for networking monitoring and management, giving you access to the entire network of IP devices - including third-party products - for remote connections, device and network configurations, and troubleshooting. Those features, paired with diagnostic data, make remote support easy, eliminating unnecessary service calls, which will enable you to streamline your business and tackle more jobs – all from the OvrC web or mobile app.

New, updated multi-core processors allow CORE 5 to run OS 3 faster and more efficiently, with power to spare for new features and functionality currently in development

Seven audio outputs—one HDMI, three stereo analog, and three digital coax—distribute up to seven simultaneous, high-resolution audio streams from native streaming services, AirPlay-enabled devices, and local music libraries

1U, fan-less design features a heat-sink chassis and integrated power supply, for a simple, silent, and reliable installation

Pre-installed ears and 1U sizing allows for convenient rack mounting

Halo is the new 'everyday' universal smart remote by Control4. The handheld device includes a host of user driven features including a 2.8” color display with a complete set of backlit buttons, voice-control, WiFi 2.4 and 5GHz support, and a redesigned UI with new interaction options. Halo remotes also feature end-user install capabilities. With a generational leap in functionality and a refined design, Halo will redefine the user experience.

Halo is the new 'everyday' universal smart remote by Control4. The handheld device includes a host of user driven features including a 2.8” color display with a complete set of backlit buttons, voice-control, WiFi 2.4 and 5GHz support, and a redesigned UI

Control4® Halo Remote

Innovative Voice Control with a Dynamic Duo

Gone are the days for old manufacturer’s voice remote controls. Halo and Halo Touch feature a new dynamic Voice Button so your customers can control AppleTV and Xfinity devices with the power of their own voice. When Apple TV is the selected source, push-to-talk for Siri. When watching Xfinity, push-to-talk for Xfinity Voice Remote.

The Halo family of remotes offer a premium experience for you and your customers. Custom hard buttons include digital labels for easy identification, and an innovative Color Shortcut Button provides streamlined access to the red, green, blue, and yellow (RGBY) buttons for AV devices. “RGBY” buttons can also be programmed to execute personalized automated scenes.

Select media, favorites, automation, and menu options with three hard custom buttons that include digital labels for easy identification

Color shortcut button accesses the red, green, blue, and yellow functionality of media devices and other programming

Capable of media browsing, device control and scene selection for Watch, Listen, Lighting, and Comfort (security, and other experiences coming soon)

The Neeo Remote for Control4 puts the power of Control4 Smart Home OS 3 in the palm of your hand. Engineered by our team of Swiss designers, the remote's machined aluminum chassis and intuitive interface are expertly crafted to bring a highly refined experience to your media room.

The Neeo Remote for Control4 puts the power of Control4 Smart Home OS 3 in the palm of your hand. Engineered by our team of Swiss designers, the remote's machined aluminum chassis and intuitive interface are expertly crafted to bring a highly refined expe

Control4® Neeo Black Remote Home Controller

The Neeo Remote for Control4 puts the power of Control4 Smart Home OS 3 in the palm of your hand. Engineered by our team of Swiss designers, the remote's machined aluminum chassis and intuitive interface are expertly crafted to bring a highly refined experience to your media room. The Neeo Remote controls television, movies, music, lights, thermostats, and virtually anything else in a Control4 Smart Home. Its 81 mm (3.2-inch), high-resolution touchscreen and software-driven graphical interface reduce the number of buttons and make personalized features of Smart Home OS 3—like favorites—available now from a handheld remote. It includes physical buttons for the essentials, so it’s easy to mute the movie or adjust the volume without looking down. The Neeo Remote is more than a television remote—it is a smart home interaction device that is always available and easy for anyone to use.

Handheld remote that leverages the power of Control4 Smart Home OS 3 to access the things you use most

Built from machined aluminum, the remote is beautiful and fits comfortably in your hand; available in silver and black finishes

Big, bright 3.2" high-resolution touchscreen is customizable using favorites and the Control4 mobile app

Includes only the most important buttons, so it's easy for everyone to learn and use

Wi-Fi connected for a graphical experience that you can use throughout the home

Control4® Neeo SIlver Remote Home Controller-NE-RMT-AS

Control4® Neeo SIlver Remote Home Controller

The Single Room Bundle with CORE lite + SR-260 is a complete entry-point solution that will provide customers with the full Control4® Experience. CORE lite is the foundation for the bundle, providing universal control, intelligent automation experiences, high-resolution audio streaming, an HD OnScreen menu, and cloud services. The SR-260 with Charging Station gives customers reliable access to all their devices using tactile buttons for responsive and intuitive one-handed control. This bundle is a great option when WiFi reliability is a concern because the SR-260 relies on Zibee for a reliable connection. Deliver a comprehensive Control4® experience at an affordable price –with a CORE lite automation foundation and the robust, familiar controls of the SR-260 with Charging Cradle.  This bundle includes a CORE lite Controller and an SR260 with Recharge Station. Control4 Connect is required starting April 23, 2024.

The Single Room Bundle with CORE lite + SR-260 is a complete entry-point solution that will provide customers with the full Control4® Experience. CORE lite is the foundation for the bundle, providing universal control, intelligent automation experiences, 

Control4® Single Room Bundle with CORE lite + SR260 Remote and Charging Station

The award-winning CORE Series Controllers are the foundation for intuitive control. As the most accessible controller, the CORE lite features a dual-core processor, a single zone of high-resolution audio streaming, an HD OnScreen Menu plus three 3.5mm ports for IR and serial control, an internal Zigbee antenna and a network port for wireless and IP control.

The SR260 is fast to wake, quick to respond, and always reliable. It features a familiar button layout that is intuitive, making it the perfect hand-held interface that anyone can use, even one-handed or in the dark. Program the custom buttons for easy access to favorite media, scenes and automations, while customers personalize the remote with color selection for the text, brightness controls, and languages selection, including support for right-to-left languages like Hebrew and Arabic. Supported in OS 3 and backwards compatible to OS 2.7, the SR260 is a sure win for any system.

Control4 offers integration for 20,000+ consumer electronics and smart devices, as well as orchestrated scenes, personalized automations, and media browsing on multiple streaming providers. And yet, the Control4 user interface remains simple, intuitive and uncluttered. At the customer's pleasure, the interface makes itself available via their TV, a touchscreen, the SR260 Remote, and the Control4 App.

CORE lite uses the Ryff audio platform to power a single zone of high-resolution audio (192KzHz sample rate at 24-bit depth), either through HDMI or through the network to a MoIP Receiver.

CORE lite functions as an OvrC hub, making it easier to keep a customer's system updated, maintained and running. OvrC enables proactive maintenance, firmware updates, and network monitoring and management, and provides a comprehensive suite of diagnostic and troubleshooting tools. Enjoy peace of mind knowing that OvrC provides system-based notifications and alerts, and if necessary, a remote access connection to resolve customer requests and concerns.

With an active cloud-services subscription, customers can access their system and all of its controls remotely through the Control4 App for Android and iOS—including the Apple Watch. The app also provides system-based notifications and alerts, Intercom Anywhere, Alexa and Google Assistant voice integrations, custom programming opportunities, and cloud backups of their Control4 project.

The Control4 SR-260 remote is the perfect hand-held interface to the whole home. This beautiful remote feels good in the hand, has an intuitive button layout perfect for one-handed operation, and is highly customizable.

Control4® System Remote Control SR260

Beautiful ergonomics and powerful programmability give homeowners the perfect one-handed remote for their whole smart home, from entertainment to smart lighting, security, comfort, and more.

Redesigned button layout makes the media experience more intuitive and easy to use in the dark or with one hand.

Fast and responsive, the remote responds right when your customer needs it.

Multiple custom buttons make it easy to personalize the remote for each room or activity.

Give your customers the ultimate smart home experience with the Control4 T4 Touchscreen. As a direct replacement for the T3 Touchscreen, T4 delivers a high-resolution screen, dual microphones, and more powerful speakers than the T3. With its elevated features, T4 is the perfect companion for the new Control4 Chime Video Doorbell, OS 3, and Intercom Anywhere.

Give your customers the ultimate smart home experience with the Control4 T4 Touchscreen. As a direct replacement for the T3 Touchscreen, T4 delivers a high-resolution screen, dual microphones, and more powerful speakers than the T3. With its elevated feat

Control4® T4 Series In-Wall Touchscreen

Available in black and white finishes, and in 8" and 10" sizes

An elevated experience for Chime, OS 3, and Intercom Anywhere

Control4® T4 Series Tabletop Touchscreen

Control4 Keypads provide a stunning interface for your Control4 Smart Home system, combining flexible button configuration with beautiful aesthetics to complement the decor of your home. With the simple press of a button, you can activate a scene, allowing events to happen simultaneously.

Control4 Keypads provide a stunning interface for your Control4 Smart Home system, combining flexible button configuration with beautiful aesthetics to complement the decor of your home. With the simple press of a button, you can activate a scene, allowin

Control4® White Auxiliary Keypad

This economical solution for three-way control of a load uses existing in-wall three-way wiring to wire directly to any compatible Control4 Dimmer, Switch, or Fan-Speed Controller. Available in 9 stylish colors and finishes. 120V/277V.

Provides full control of the load attached to the associated Dimmer, Switch, or Fan-Speed Controller

Communicates directly with the load-control device over the existing 3-way wiring

Capable of controlling the load even without the automation system in place

Available in a wide array of gloss and satin colors (See Available Colors)

Control4® screw-less faceplates, sold separately, provide a sleek profile (See Available Accessories)

Use up to ten Auxiliary Keypads with a single load-control device

Intelligent lighting is an essential part of every smart home and provides added convenience and peace of mind. Set the scene perfectly with this Control4 Lighting Control Package. Use the Control4 mobile app (C4 Connect License required) to turn lights on, off, dim, and create scenes. Package allows for 24 lighting loads. Installation, programming, and C4 Connect License not included in package price. 

Intelligent lighting is an essential part of every smart home and provides added convenience and peace of mind. Set the scene perfectly with this Control4 Lighting Control Package. Use the Control4 mobile app (C4 Connect License required) to turn lights o

Lighting Control Package (24 Loads)

Intelligent lighting is an essential part of every smart home and provides added convenience and peace of mind. Set the scene perfectly with this Control4 Lighting Control Package. Use the Control4 mobile app (C4 Connect License required) to turn lights on, off, dim, and create scenes. Package allows for 24 lighting loads. Installation, programming, and C4 Connect License not included in package price. Package includes:

Most Popular

Price: Low to High

Price: High to Low

Default Dev Script Validation

<avb-promotions data-type="custom" data-banner-id="764197"></avb-promotions>  <avb-promotions data-type="custom" data-banner-id="764198"></avb-promotions>

Default Header After Global Promotions

control4

Control4® 120V Snow White Forward Phase Dimmer

Control4® Black Wireless Fan Speed Controller

Control4® CA-1 Hub and Automation Controller

$446.17

Control4® Chime Satin Nickel Point of Entry Video Doorbell

Control4® CORE 1 Controller

$908.43

Control4® CORE 3 Controller

$1,661.93

Control4® CORE 5 Controller

$3,478.03

Control4® Halo Remote

$615.99

Control4® Neeo Black Remote Home Controller

Control4® Neeo SIlver Remote Home Controller

Control4® Single Room Bundle with CORE lite + SR260 Remote and Charging Station

$849.99

Control4® System Remote Control SR260

$279.23

Control4® T4 Series In-Wall Touchscreen

$1,695.93

Control4® T4 Series Tabletop Touchscreen

$1,309.30

Control4® White Auxiliary Keypad

Lighting Control Package (24 Loads)

$2,799.99

Is it Time to Plan Your Next Great Project? Great projects start with great plans! Let our team of experts find the right solutions to meet all your needs, for projects from residential to commercial. Send us your details below, and one of our friendly and knowledgeable professionals will reach out.

Shop

About

Contact Us

Connect with Us

Payment Methods